C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Air Injection Vacuum Control Solenoid Valve: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the AIR solenoid (2) electrical connector.
IMPORTANT: Observe the position of the vacuum lines. The vacuum source port is on the same side as the mounting bracket
2. Remove the vacuum hoses from the AIR solenoid vacuum ports (3, 4).
3. Remove the fastener securing the AIR solenoid mounting bracket (2) to the base.
4. Remove the AIR solenoid (1).
INSTALLATION PROCEDURE
