C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Canister Vent Valve: Service and Repair
Evaporative Emission (EVAP) Canister Vent Valve Replacement
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the vent pipe (2) from the evaporative emission (EVAP) canister vent valve.
3. Disconnect the EVAP canister vent valve electrical connector (3).
4. Detach the EVAP canister vent valve from the EVAP canister vent valve bracket (1).
INSTALLATION PROCEDURE
1. Install the EVAP canister vent valve to the EVAP canister vent valve bracket (1).
2. Connect the EVAP canister vent valve electrical connector (3).
3. Connect the vent pipe (2) to the EVAP canister vent valve.
4. Lower the vehicle.
