C 2500 Suburban 2WD V8-8.1L VIN G (2001)
Power Door Lock Switch: Removal and Replacement
Door Lock Switch Replacement
Removal Procedure
1. Remove the power accessory switch plate.
2. Disconnect the power door lock switch wiring connector.
3. Carefully bend the retaining tabs of the power door lock switch outward while pushing the switch out of the plate.
Remove the switch.
Installation Procedure
1. Install the power door lock switch by snapping the retaining tabs.
2. Connect the power door lock switch wiring connector.
3. Install the power accessory switch plate.
