C 2500 Suburban 2WD V8-8.1L VIN G (2001)
3. Install the upper control arm retaining bolt to the frame bracket.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Do not tighten the nuts unless the suspension is at the curb height position.
4. Install the upper control arm retaining nut.
-
Tighten the upper control arm retaining bolts to 105 Nm (77 ft. lbs.).
5. Connect the (RTD) sensor (if equipped). Refer to Rear Position Sensor Replacement - Electronic Suspension in Real Time Damping (RTD).
6. Lower the vehicle.
