C 2500 Truck 2WD V6-262 4.3L VIN Z (1992)
Valve Body: Service and Repair
With 4L60 Automatic Transmission
Control Valve Assembly
1.
Drain and remove oil pan and remove filter and gasket.
2.
Disconnect electrical connectors at valve body.
3.
Remove detent spring and roller assembly from valve body and remove valve body to case bolts.
4.
Remove valve body assembly while disconnecting manual control valve link from range selector inner lever and removing throttle lever bracket
from TV link.
5.
Reverse procedure to install. Torque bolts to 8 ft. lbs. and replenish fluid.
Valve Body Removal and Installation
Valve Body Bolt Locations
Valve Body Checkball Locations