C 2500 Truck 2WD V6-4.3L VIN W (1996)
Fig. 2 Exploded View Of Dana Front & Rear Drive Axle w/9 3/4 Inch Ring Gear.
1. Remove axle shafts. Refer to Axle Shaft, Conventional Fixed/Floating / Service and Repair. See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair
2. Remove plug and drain lubricant from carrier.
3. Remove carrier cover attaching screws, then the cover and gasket, Figs. 1 and 2.
4. Mark one side of carrier and matching bearing cap for assembly reference, then remove the bearing caps.