C 2500 Truck 2WD V8-305 5.0L (1990)
3. Intake manifold to the engine.
4. Intake manifold bolts.
Tighten
Intake manifold bolts to 48 Nm (35 ft. lbs.). Use the tightening sequence.
5. TB unit (if removed).
6. Bracket at rear of belt idler
7. Fuel line bracket at rear of manifold.
8. Emission control sensors and bracket.
9. Coil wires.
10. Brake booster vacuum pipe.
11. Air conditioning compressor rear bracket.
12. Distributor.
13. Accelerator, cruise control, and TVS cables, as equipped.
14. Fuel line(s) at the TB unit.
15. Electrical connections.
16. Vacuum hoses.
17. Generator brace.
18. Heater pipe and upper radiator hose.
19. Air cleaner
20. Battery negative cable.
-
Fill the cooling system with the proper quantity and grade of coolant.