C 2500 Truck 2WD V8-305 5.0L VIN M SFI (1997)
Brake Shoe: Testing and Inspection
NOTE: Inspect the linings every 9,650 km (6,000 miles) and any time the wheels are removed (tire rotation, etc.). Inspect the shoe and lining
assemblies for wear by removing the brake drum. Replace shoe and lining assemblies when the thickness of any lining is worn within 0.76 mm (0.030
inch) of the shoe. Replace riveted shoe and lining assemblies when the lining is worn to within 0.76 mm (0.030 inch) of any rivet head. Always replace
shoe and lining assemblies as a complete axle set.
1. Remove brake drum.
2. Measure brake lining thickness. Replace shoes if lining is worn beyond wear limit shown in Specifications.
