chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling the SIR System|Page 10806 > < Service Port HVAC|Locations
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling the SIR System

Remove or Disconnect (Figure 11)

-

Turn the steering wheel to the straight ahead position.

-

Remove the key from the ignition switch.

1. The AIR BAG Fuse from the I/P fuse block.
2. The I/P sound insulator (LH).
3. The Connector Position Assurance (CPA) and he driver yellow 2-way connector located at the base of the steering column.
4. The Connector Position Assurance (CPA) and the passenger yellow 2-way connector located near the base of the steering column.

Important

With the AIR BAG Fuse removed and the Ignition switch in the RUN position, the AIR BAG warning lamp Illuminates. This is normal operation and
does not indicate a SIR system malfunction.

Disabling the SIR System|Page 10806 > < Service Port HVAC|Locations