C 2500 Truck 2WD V8-350 5.7L (1988)
3.
Remove the six bolts (three on each side) attaching the latch assemblies to the tailgate (Figure 1).
4.
Remove the striker bolts from the pickup box.
5.
Install the latch assemblies with the redesigned rubber cables (P/N 15675385 (LH) and 15675386 (RH)).
6.
Install the six bolts (three on each side) into the latch assemblies (Figure 2).
7.
Tighten the bolts attaching the cables to the tailgate to 25 N-m (18 lbs.ft.).
Important:
DO NOT torque the bolts over 25 N-m (18 lbs.ft.). Exceeding the torque specifications could cause the cable assembly to catch against the latch
assembly.
8.
Install new striker bolts (P/N 15673252). Torque the striker bolts to 63 N-m (47 lbs.ft.).
9.
Raise the tailgate and attach the cables to the striker bolts.
SERVICE PARTS INFORMATION
Part Number
Description
Qty/Veh
15675385
Latch Assembly (LH)
1
15675386
Latch Assembly (RH)
1
15673252
Striker Bolt
2
Parts are expected to be available on 4-20-92. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only verifiable
emergency orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation at the dealer's
expense and all other order types will be placed on backorder until the 400 control is removed.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Op.
Description
B5750
Support, Tailgate Cable - Replace (RH)
B5751
Support, Tailgate Cable - Replace (LH)
Use applicable labor time guide for labor hours.