C 2500 Truck 2WD V8-379 6.2L DSL VIN J FI (1992)
Brake Lamp: Description and Operation
Voltage is applied at all times through the STOP-HAZ Fuse to the Stoplamp Switch. When the brake pedal is depressed, the contacts in the Stoplamp
Switch close. Voltage is applied through the Turn Switch Assembly to the LH and RH Stoplamp, and the Stoplamp lights. If a Turn Signal is on, the
Stoplamp on that side will flash as a Turn Signal. The other Stoplamp will serve as a Stoplamp.
