C 2500 Truck 2WD V8-379 6.2L DSL VIN J FI (1992)
EGR Valve: Testing and Inspection
Preliminary Checks
Conditions most likely to cause vacuum system problems include hoses that leak or become disconnected. With the engine running, either condition is
easily detected from the hiss of air at the opening. Other common vacuum problems are kinked or obstructed hoses, hoses connected incorrectly or
binding components.
A vacuum pump can be used as a vacuum source to operate components and test the system. The built-in vacuum gage of the pump provides a means
of checking for a vacuum leak as well. Once vacuum is applied to operate the component, the gage should hold steady until the vacuum is purposely
released.
On vacuum systems that are controlled by electrical or electronic switches, check for a blown fuse, wiring that is cracked, frayed or burned, and high
resistance in connectors of the control circuit(s) before checking for a suspected vacuum system problem.
