C 2500 Truck 2WD V8-454 7.4L (1988)
Glove Compartment: All Technical Service Bulletins
Interior - Glove Box Light Stays On
Number:
88-127-10
Section:
10
Date:
Jan., 1988
Subject: GLOVE BOX LIGHT STAYS ON
Model and Year: 1988 C/K MODELS
TO:
ALL CHEVROLET DEALERS
Some 1988 C/K Models may have glove box lights that stay on when the glove box door is closed. This condition may be caused by material in the
glove box pressing against the glove box door allowing the light switch to stay activated.
To repair this condition, drill a 3/16 inch hole 3/4 inch deep in the glove box door in the area of the glove box door that contacts the light switch. Push
plastic stop fastener, P/N 15607147, into the drilled hole. The plastic stop fastener depresses the light switch an additional 1/16 of an inch, which is
enough to eliminate this condition.
NOTICE:
Exercise care when drilling so as not to drill through the glove box door.
Labor Op:
T7495
Labor Time:
.2 Hour