C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
-
Blower motor flange screws to 1.4 Nm (12 lb in).
3. Blower motor cooling tube.
4. Blower motor cover.
5. Bolt to right lower I/P support.
6. Electrical connectors to blower motor, as necessary.
7. Right hinge pillar trim panel.
8. Front screw into front door sill plate.
9. Instrument panel storage compartment.
10. Negative battery cable.
-
Check circuit operation.