C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Audible Warning Device: Description and Operation
Seat Belt Alarm
This system activates a warning lamp for about 75 buzzer sequence of operation is as follows: seconds and a buzzer for about 8 seconds when the
ignition switch is turned to the "RUN" position and the driver's seat belt is not buckled. The warning lamp will be constant for the first 20 seconds, then
flash for the remaining 55 seconds. The buzzer only turns on, and will stay on when the drivers seat belt is not fastened during the 8 second period. The
warning lamp and
1. DRIVER'S SEAT BELT UNFASTENED - Turn the ignition switch to the "RUN" position. The warning lamp illuminates constantly for 20
seconds, then flashes for the remaining 55 seconds. The buzzer turns on and stays on for 8 seconds, then turns off. If the driver's seat belt buckle is
fastened before the a seconds over, the buzzer will turn off and the lamp will remain on for the balance of the time delay.
2. DRIVER'S SEAT BELT FASTENED - Turn the ignition switch to the "RUN" position. The warning lamp will turn on and the buzzer stays off. At
the end of 75 seconds the warning lamp turns off. If the driver's seat belt buckle is unfastened prior to 8 seconds, the buzzer will turn on for the
balance of the 8 second delay.
