C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
3. Inner bearing cup using J 8092 and J 24427.
-
Drive the cup into place until it is seated against the hub shoulder.
4. Inner bearing.
5. New oil seal using J 39114-A.
6. Hub and drum.
7. Outer bearing.
Adjust
-
Bearing preload. Refer to BEARING ADJUSTMENT. See: Adjustments/Rear Axle/Full-Floating Axle (11 Inch Ring Gear)
8. Axle shaft.