C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Fuel Inlet & Return Lines: Service and Repair
Replacement, Engine Overhaul
REMOVAL
1. Remove the clamps from the return hoses at the injection nozzles.
2. Remove the fuel return hoses at the injection nozzles.
3. Remove the fuel return crossover line brackets at the front of both valve rocker arm covers.
4. Remove the clamps and the fuel inlet hose from the fuel injection pump.
5. Remove the clamps and the fuel return hose from the fuel injection pump.
6. Remove the fuel return crossover lines.
INSTALLATION
1. Install the fuel inlet line to the fuel injection pump.
2. Install the fuel return hose to the fuel injection pump.
3. Install the fuel return line brackets on the front left and the front right side rocker covers.
4. Install the fuel return hoses at the injector nozzles.
5. Install the clamps.
