C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Springs And Brushes On The Brush Holder
A. Position the terminals of the grounded brush leads behind the terminal tabs on the brush holder.
B. Insert the brush screws through the terminal tabs on the brush holder and thread into the brush lead terminals.
Tighten
-
Grounded brush screws to 1.5 N.m (13 lb in).
Electrical Group
4. Frame and field assembly to the brush holder assembly.
A. Position the brush holder assembly (with installed brushes) over the terminal end of the frame and field assembly.
B. Attach the terminals of the insulated brush leads to the conductors in the frame and field assembly with insulated brush screws.
Tighten
-
Insulated brush screws to 1.5 N.m (13 lb in).
Unit Assembly
