C 2500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Wiper Arm: Service and Repair
Wiper Blade Replacment
REMOVE OR DISCONNECT
1. Washer hose.
2. Lift the wiper arm assembly from the glass and pull the retaining latch.
3. Wiper arm assembly from the wiper motor driveshaft.
INSTALL OR CONNECT
1. Wiper arm assembly with the wiper motor in the park position.
A. Install the head of the wiper arm assembly onto the serrated wiper motor driveshaft in a position where the blade will rest in a proper parked
position (blade parallel to the edge of the glass).
B. Lift the wiper arm extension and push in the retaining latch when the head is fully seated onto the driveshaft.
2. Washer hose, engaging the hose grommet in the liftglass hole.
