C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
3.
Apply Glass Adhesion Promoter, P/N 12378555 (in Canada, use P/N 88901239), to the glass in the area where you will install the antenna
coupling. Follow the Glass Adhesion Promoter instructions on the product label.
Important:
^
Align the outer antenna coupling with the inner coupling.
^
Do not touch the adhesive backing on the antenna coupling.
4.
Remove the protective film from the adhesive backing on the outer antenna coupling.
5.
Align the outer antenna coupling to the inner antenna coupling.
6.
Press firmly on all 4 corners and on the center of the outer antenna coupling (5) in order to ensure proper adhesion to the glass (4).
Hold pressure on the outer coupling (5) for 10 to 30 seconds.
7.
Ensure that no gaps occur between the couplings (5, 2) and the glass (4).
8.
Keep the vehicle dry. Allow 6 to 8 hours, at 15°C (60°F), for the adhesive to cure after installation.
Disclaimer
