C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the ashtray housing to the lower IP trim panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws holding the ashtray housing to the rear of the IP lower trim panel.
Tighten the ashtray housing screws to 2 N.m (18 lb in).
3. Connect the ashtray lamp wiring harness to the ashtray housing.
4. Install the lower IP trim panel.
5. Insert the ashtray to the IP by depressing the tab and sliding the ashtray forward.
