C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Parking Brake Cable: Service and Repair
Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal.
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Disengage the grommet and the cable from the floor pan.
6. Disconnect the front cable from the intermediate cable.
7. Remove the cable from the body mount by depressing the retaining tabs.
8. Remove the cable.
Installation Procedure