C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
5. If equipped with the 4.81L, 5.31L, or 6.0L engine, install the inlet hose to the radiator.
6. Position the inlet hose clamp at the radiator.
7. Install the inlet hose rosebud clips to the following locations:
^
Fan shroud
^
Air cleaner outlet duct
8. If equipped with the 6.0L, 6.6L, or 8.1L engine with the RPO M74 transmission, reposition the TCM electrical connectors.
9. Connect the TCM electrical connectors (1).
10. Install the TCM and cover.
11. Tighten the TCM electrical connector bolts,
^
Tighten the TCM electrical connector bolts to 8 Nm (71 inch lbs.).
12. If equipped with the 6.0L, 6.6L, or 8.1L engine with the RPO M74 transmission, push down the TCM cover in order to clip the cover to the fan
shroud.
13. Install the TCM cover bolts.
^
Tighten the TCM cover bolts to 9 Nm (80 inch lbs.).
