C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Valve Cover: Service and Repair
Upper Right
Valve Rocker Arm Cover Replacement Upper Right
Removal Procedure
1. Remove the upper intake manifold sight shield using the following procedure:
1.1.
Remove the retaining bolt in the front of the shield.
1.2.
Lift-up on the front of the shield.
1.3.
Lift the shield off the rear bracket.
2. Remove the air cleaner outlet duct from the air cleaner and the turbocharger.
3. Cover the turbocharger opening with tape.
4. Loosen both hose clamps for the charged air cooler outlet duct to intake manifold tube hose.
Important: Do not use a screwdriver or other prying tool to remove the hose. The hose can be damaged.
5. Using a twisting motion remove the hose from the intake manifold tube and the pipe.
6. Cover the opening on the pipe and the intake manifold tube with tape.