C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Engine Oil: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Place a suitable container under the oil pan to drain the oil into.
3. Remove the oil drain plug.
4. Drain the engine oil.
5. Remove the oil filter.
6. Inspect to ensure the engine oil filter gasket is removed.
Installation Procedure
1. Lubricate the oil filter seal with clean engine oil.
2. Install the oil filter.
^
Tighten the oil filter after contacts plus 1 to 11/4 turn.
