C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Control Arm: Service and Repair
Rear Lower
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the lower control arm retaining nuts.
3. Remove the lower control arm retaining bolt.
4. Remove the lower control arm.
Installation Procedure
1. Install the lower control arm.
2. Install the lower control arm retaining bolts.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Do not tighten the bolts unless the suspension is at the ride height.
3. Install the lower control arm retaining nut.
-
Tighten the lower control arm retaining bolts to 120 Nm (89 ft. lbs.).
4. Remove the rear axle support.
5. Lower the vehicle.
