C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
11. Remove the oil cooler pipes from the clip at the oil pan.
12. Remove the oil cooler pipes (1,2) from the transmission.
13. Remove the cooler lines from the vehicle.
Installation Procedure
Important: Do not reuse any of the existing E-clips that were removed from the existing quick connect fittings. All clips being installed must be new.
1. Install a new E-clip into the quick connect fittings.
2. Hook one of the open ends of the E-clips in one of the slots in the quick connect fitting.
