C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
9. Pull up on the center tabs of the lock button (2).
Important: Do not reuse the existing removed E-clip. Discard the removed E-clip.
10. Remove the E-clip by pulling radially on the center section of the E-clip.
11. Pull the shift cable center connector ends apart.
12. Remove the cable half from the vehicle.
13. Install a NEW E-clip to the shift cable end by pushing the E-clip straight down (radially) onto the cable end.
14. Position the steering column shift lever to the park position.
15. Remove the steering column shroud.
16. Remove the driver's seat from vehicle.
17. Peel back the carpet and insulation around the driver's area.
18. Remove the retainer securing the shift cable to the steering column.
