C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Transmission Mount: Service and Repair
NV 3500 - Manual Transmission
Transmission Mount Replacement
Removal Procedure
Notice: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the
remaining mounts are subjected to abnormally high stresses.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the nut holding the rear engine mount to the transmission support.
3. Remove the mount to transmission bolts.
4. Raise the transmission using a suitable transmission jack, just enough in order to permit the removal of the mount.
5. Remove the mount.
