C 2500 Truck 2WD V8-8.1L VIN G (2002)
Front Door Panel: Service and Repair
Panel Replacement
Front Side Door Trim Panel Replacement
Front Side Door Trim Panel Replacement
Removal Procedure
1. Remove the door handle bezel. Refer to Door Inside Handle Bezel Replacement (See: Door Inside Handle Bezel Replacement).
2. Remove the window handle, if equipped. Refer to Door Window Regulator Handle Replacement (See: Windows and Glass/Windows/Window
Handle/Service and Repair).
3. Remove the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement (See: Locks/Power Locks/Power Door Lock
Switch/Service and Repair/Procedures/Power Accessory Switch Panel Replacement).
4. Remove the upper extension of the trim panel. Refer to Upper Extension Trim Panel Replacement (See: Upper Extension Trim Panel
Replacement).
5. Remove the manual lock lever from the trim panel using a flat bladed tool.
6. Remove the trim panel screws.
7. Remove the courtesy lamp, if equipped. Refer to Door Courtesy Lamp and Reflector Replacement .
8. Remove the trim panel from the door. Carefully slide the trim panel up in order to release the retainers from the door.
9. Disconnect the electrical connectors.
Installation Procedure
1. Connect the electrical connectors.
2. Install the courtesy lamp, if equipped. Refer to Door Courtesy Lamp and Reflector Replacement .
3. Carefully align the panel, and slide the panel into the retainer slots in order to install the trim panel to the door.
4. Install the window handle, if equipped. Refer to Door Window Regulator Handle Replacement (See: Windows and Glass/Windows/Window
Handle/Service and Repair).
5. Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement (See: Locks/Power Locks/Power Door Lock
Switch/Service and Repair/Procedures/Power Accessory Switch Panel Replacement).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) in Cautions and Notices.
6. Install the trim panel screws.
