C 2500 Truck 2WD V8-8.1L VIN G (2002)
1. Remove center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement (See: Trim Panel/Service and Repair/Center Pillar Garnish
Molding Replacement).
2. Remove the assist handle retraining screws.
3. Remove the assist handle from the vehicle.
Installation Procedure
1. Install the assist handle to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the assist handle screws.
Tighten the screws to 6 Nm (53 lb in).
3. Install the center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement (See: Trim Panel/Service and Repair/Center Pillar
Garnish Molding Replacement).