C 2500 Truck 2WD V8-8.1L VIN G (2002)
Sun Visor: Procedures
SUNSHADE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws.
2. Disconnect the electrical connector if equipped.
3. Remove the sunshade.
INSTALLATION PROCEDURE
1. Connect the electrical connector, if equipped.
2. Install the sunshade.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the sunshade screws.
Tighten
Tighten the screw to 2 N.m (18 lb in).
