C 2500 Truck 2WD V8-8.1L VIN G (2002)
1. Install the seat belt assembly. Refer to Rear Seat Belt Retractor Replacement (Extended Cab) Rear Seat Belt Retractor Replacement (Crew Cab)
.
2. Install the quarter panel to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 Nm (18 lb in).
4. Install the sill trim plates. Refer to Front Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and Repair/Removal and
Replacement/Front Side Door Sill Trim Plate Replacement).
5. Install the armrest.
6. Install the armrest screw.
Tighten the armrest screw to 2 Nm (18 lb in).
7. Install the rear window molding. Refer to Rear Window Lower Garnish Molding Replacement (See: Rear Window Lower Garnish Molding
Replacement).
8. Install the rear seat if necessary. Refer to Rear Seat Replacement (Extended Cab w/4th Door) (See: Seats/Service and Repair/Rear Seat
Replacement (Extended Cab w/4th Door))Rear Seat Replacement (Extended Cab) (See: Seats/Service and Repair/Rear Seat Replacement
(Extended Cab))Rear Seat Replacement (60/40 Split) (See: Seats/Service and Repair/Rear Seat Replacement (60/40 Split)).