C 2500 Truck 2WD V8-8.1L VIN G (2002)
15. Remove the CPA retainer at the ignition coil harness.
16. Disconnect the following electrical connectors:
-
Generator (1)
-
Injector harness (2)
-
Ignition coil harness (3)
-
Throttle position (TP) sensor (4)
-
Electronic throttle control (ETC) (5)
-
Purge valve solenoid (6)
17. Reposition the engine harness to the drivers side of the engine compartment.
18. Remove the bypass valve vacuum hose (1) from the intake manifold.
19. Disconnect the exhaust gas recirculation (EGR) valve electrical connector (1).
20. Remove the EGR pipe bolts at the EGR adapter.
