C 2500 Truck 2WD V8-8.1L VIN G (2002)
29. Route the deployment harness out of the vehicle's passenger side.
30. Stretch the driver side harnesses to full length.
31. Stretch the passenger side harnesses to full length.
32. Completely cover the windshield and front door window openings with a drop cloth.
33. Place a power source, 12 V minimum/2 A minimum, i.e., a vehicle battery, near the shorted ends of the passenger side deployment hamesses.
34. Separate the 2 ends of the IP module deployment harness wires.
35. Connect the IP module deployment harness wires to the power source in order to deploy the IP module.
36. Disconnect the P module deployment harness wires from the power source.
37. Twist together 1 end of each wire of the IP module on the passenger side deployment harness in order to short the wires.
