C 2500 Truck 2WD V8-8.1L VIN G (2002)
7. Install the connector and fitting assembly (5). To install the variable assist steering actuator (3) and retaining ring (4); refer to Power Steering
Pump Flow Control Valve Actuator Replacement - On Vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the pump mounting studs (2) to the pump housing (1).
^
Tighten the pump mounting studs (2) to 58 Nm (43 ft. lbs.).
^
Tighten the connector and fitting assembly (5) to 75 Nm (55 ft. lbs.).
