C 2500 Truck 2WD V8-8.1L VIN G (2002)
8. Grasp the front half (steering column end) of the transmission cable (1) in the left hand and the rear half (transmission end) of the transmission
cable (2) in the right hand.
9. Align the outside diameter of cable (2) with the inside of the diameter of cable (A).
10. Push the end of the cable (2) inside the end of cable (1) until the blue spring on cable (2) is fully compressed.
Pushing together the two ends of the cable will engage the inner wire and lock both cable wires together.
Important: This step must be performed correctly to avoid a misadjusted cable.