C 2500 Truck 2WD V8-8.1L VIN G (2002)
16. Do not install the cooler line end into the fitting incorrectly.
17. If you cannot position the plastic cap against the fitting, remove the retaining ring from the quick connect fitting. Check the retaining ring and the
tube end in order to ensure neither is bent. Replace the cooler line or the retaining ring if necessary, and reinstall the cooler line per the installation
procedure.
18. Install the cooling lines to the transmission.
19. If equipped, install the oil cooling lines to the auxiliary oil cooler.
20. Install the cooling lines to the clips.
21. Ensure all of the protective plastic caps are positioned over all of the quick connect fittings.
22. Lower the vehicle.
23. Fill the transmission to the proper level with DEXRON III transmission fluid.
Transmission Fluid Auxiliary Cooler Replacement
Transmission Fluid Auxiliary Cooler Replacement
Removal Procedure
1. Remove the front grill assembly.
