C 2500 Truck 2WD V8-8.1L VIN G (2002)
Front Door Window Regulator: Service and Repair
Front Door Module Replacement
Front Side Door Window Module Replacement
Removal Procedure
1. Raise and support the window.
2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front
Door Panel/Service and Repair.
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
4. Disconnect the wiring harness from the window motor assembly.
5. Remove the 2 bolts holding the window to the regulator.
6. Remove the bolts from the window regulator.
7. Remove the window regulator assembly from the door folding both sides together.
Installation Procedure
1. Install the regulator to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the window regulator.
Tighten the bolts to 9 Nm (80 lb in).
3. Align the window to the regulator and install the bolts holding the window to the regulator.
Tighten the bolts to 9 Nm (80 lb in).
4. Connect the wiring harness to the window motor assembly.
5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
6. Install the trim panel. Refer to Front Side Door Trim Panel Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front
Door Panel/Service and Repair.
7. Lower the window. Inspect the window operation.