C 30 1 Ton Pickup 2WD V8-350 5.7L VIN M 4-bbl (1983)
Fig. 5 Installing clutch plate & hub assembly
3.
Using tool J-9480-B, press hub onto shaft until there is approximately .020 to .040 inch clearance between clutch plate and rotor frictional
surfaces, Fig. 5.
4.
Install new shaft nut with small diameter boss facing toward crankshaft shoulder, using removal tools. Torque shaft nut to 8-12 ft. lbs. Ensure
specified clearance is maintained between clutch plate and rotor.
