C 30 P/U 2WD V8-379 6.2L DSL (1985)
Center Sliding Door Roller: All Technical Service Bulletins
Sliding Door - Damage to Center Track or Roller Bracket
Number:
86-68
Section:
10
Date:
APR., 1986
Subject:
SLIDING DOOR ATTACHMENT
Model and Year:
1985-86 "M" VAN
TO:
ALL CHEVROLET DEALERS
A new center track and roller bracket assembly has been released for 1985-86 M Vans to improve the sliding side door system durability. Effective with
VIN 1G8DM15Z9GB135091 on November 22, 1985, all M Vans are built with the new track and roller brackets.
If the sliding door exhibits damage to the center track or roller bracket assembly, both parts must be replaced with the new part number parts.
Perform the following service procedure when installing the new parts (listed below) on vehicles requiring side door repair.
SLIDING DOOR CENTER TRACK ASSEMBLY
Service Procedure
1.
Basecoat/clearcoat the new center track and roller bracket assembly to match the vehicle exterior finish.
2.
Remove interior trim panels (passenger model only) from right rear quarter panel to expose center track assembly and track cover fasteners (See
Figure No. 1).
3.
Remove the right rear tail lamp assembly and rubber plug to expose rearmost nut securing center track cover.
