C 30 P/U 2WD V8-379 6.2L DSL (1985)
Wheel Bearing: Service and Repair
Front
FRONT WHEEL BEARINGS AND/OR HUB
1.
Raise and support vehicle, then remove wheel and tire assembly.
2.
Remove hub cap and cotter pin.
3.
Remove brake caliper. Do not allow caliper to hang from brake hose.
4.
Remove retaining nut, then the hub and disc assembly.
5.
Remove outer wheel bearing.
6.
To remove inner bearing, pry out grease seal, then remove seal and inner bearing.
7.
Reverse procedure to install, then adjust wheel bearings as previously described.
