chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

NHTSA85V156000 > < Recall - Firestone Steel Wheels May Crack|Page 4877
Page 5
background image

Inspect all wheels.
Replace 7.

7

14035381

00  V3037

5.7

.1

  26.13

*Campaign Administrative Allowance.

**The (Parts Allowance) should be the sum total of the current GMWDD Dealer Net price plus 30% for wheel assemblies.

***Labor Hours includes labor time for painting, paint "mix time", tire mounting, balancing, and R&R of wheel assembly from vehicle.

****The Net Amount credit will automatically be given for each labor operation to cover the cost of paint, paint supplies and valve stem(s) used in
conjunction with the repair.

Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.
(Notification Used by Chevrolet Motor Division)

Dear Chevrolet Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. General Motors has been notified
by Firestone Steel Products that a defect which relates to motor vehicle safety exists in some Firestone Steel Products 16 X 6 disc wheels, which were
installed on some 1985 C, K, & P30 Chevrolet Light Duty Model Trucks equipped with dual rear wheels, (RPO R05). Firestone has reported that a
wheel failure could develop with a crack through the fillet weld nugget between the disc and rim. This crack could propagate around the wheel
eventually resulting in a separation of the rim from the disc. When the vehicle is in motion, this may cause loss of vehicle control and subsequent vehicle
crash without prior warning. To prevent the possibility of the condition occurring on your vehicle, please contact your Chevrolet Dealer on or after the
date shown below to arrange a service date. Your dealer will inspect each wheel on your vehicle and replace it if necessary. This service will be
completed at no charge to you. Instructions for making this correction have been sent to your Chevrolet Dealer. It is estimated that parts will be available
on December 13, 1985. The labor time necessary to inspect the wheels on your vehicle is approximately 30 minutes. Additional labor time to replace
your vehicle's wheels if necessary, will vary between 1-1/2 hours and 6 hours. Please ask your dealer if you wish to know how much additional time will
be needed to process your vehicle. Your Chevrolet Dealer is best equipped to obtain parts and provide service to ensure your vehicle is corrected as
promptly as possible. However, if you take your vehicle to your dealer on the agreed service date, and they do not remedy this condition on that date or
within five days, we recommend you contact the nearest Chevrolet Zone Office, either in person or by telephone. The Zone Office will assist you and the
dealer in getting your vehicle corrected. The locations and telephone numbers of the Zone offices are listed in your owner's Manual. After contacting
your dealer and the Zone Office, if you are still not satisfied that we have done our best to remedy this condition without charge and within a reasonable
time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh St., S.W., Washington, D.C. 20590 or call
800-424-9393 (Washington, D.C. residents use 426-0123).
The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction in the
shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage paid owner reply card and returning it to us.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our
products.

Chevrolet Motor Division GENERAL MOTORS CORPORATION

NHTSA85V156000 > < Recall - Firestone Steel Wheels May Crack|Page 4877