chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Valve Cable/Linkage, A/T|Adjustments > < THM 350C|Page 2862
Page 2
background image

If the T.V. cable is adjusted too long, it may result in one of the two following conditions:

1. Early and slipping shifts and/or no detent downshifts.
2. Delayed or full throttle shifts by causing the transmission to operate in the high pressure mode. The transmission senses a malfunction of the

T.V. cable and associated parts; and to prevent burning the clutches and band due to low line pressures, it will go into the high pressure mode.
Line pressures checked under the minimum T.V. conditions in Neutral and Drive will be in the range of the "full" T.V. pressures if the
transmission is in high pressure mode. The complaint could be described as no upshifts, delayed or sharp upshifts.

Throttle Valve Cable/Linkage, A/T|Adjustments > < THM 350C|Page 2862