C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Speaker: Service and Repair
Front
REMOVAL PROCEDURE
1. Remove the floor console from the vehicle.
2. Remove the console to speaker bolts.
3. Disconnect the electrical connector from the front floor console speaker, this is a small 2 pin connector located on the end of the speaker.
4. Remove the speaker from the console.
INSTALLATION PROCEDURE
1. Install the front floor console speaker to the console.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the console to speaker bolts.
Tighten
Tighten the console to speaker bolts to 6 N.m (53 lb in).
3. Install the electrical connector to the console speaker.
4. Install the floor console to the vehicle.