C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
19. Take care to route the wheel speed sensor wire (4) through the opening in the splash shield (1) near the center mounting hole.
20. Install 3 splash shield mounting bolts (10).
Tighten bolts to 17 Nm (13 ft. lbs.).
21. Route the wheel speed sensor wire (4) between the splash shield (1) and the knuckle.
22. Install the wheel speed sensor mounting clip (6) to the upper king pin cap.
Tighten the bolt (2) to 17 Nm (13 ft. lbs.).