C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
1. Inspect the reservoir for cracks or deformation. If found, replace the reservoir.
2. Clean the reservoir with denatured alcohol, or equivalent.
3. Dry the reservoir with non-lubricated, filtered air.
4. Lubricate the new seals and the outer surface area of the reservoir-to-housing barrels with Delco Supreme(R) GM P/N 12377967 (Canadian P/N
992667) or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
5. Insert the O-rings into the grooves in the reservoir. Make sure that the O-rings are properly seated.
6. Install the reservoir to the master cylinder body. Use your hand in order to press the reservoir straight down into the body.
7. Install the master cylinder.