C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
16. Reposition the inlet hose clamp (1) at the water crossover.
17. Remove the inlet hose (2) from the water crossover.
18. Remove the water crossover bolts.
19. Remove the water crossover.
20. Remove the water crossover gaskets.
21. Clean and inspect the water crossover.
Installation Procedure
1. Place the water crossover gaskets and crossover into place.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the water crossover bolts.
Tighten the water crossover bolts to 50 Nm (37 ft. lbs.).
