C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
26. If equipped without RPO C5B, connect the EVAP canister tube to the purge solenoid.
27. If equipped with RPO C5B, install the EVAP tube.
28. Connect the EVAP canister tube to the purge solenoid.
29. Connect the canister tube to the canister.
30. Position the wiring harness.
31. Install the wiring harness bolts.
Tighten the engine wiring harness bolts to 5 Nm (44 inch lbs.).
32. Connect the following electrical connectors:
^
TP sensor (2)
^
ETC (3)
^
EVAP purge solenoid (4)