C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
IMPORTANT: DO NOT reuse O-ring seals.
5. Carefully slide the new O-ring seal onto the A/C refrigerant component.
6. The O-ring seal must be fully seated.
7. Assemble the A/C components. Refer to the appropriate repair procedure.
-
For compression style fittings use a back up wrench on the fitting (2) and tighten the fitting nut (1) to specification.
-
For banjo style fittings install the bolt retaining the banjo type fitting and tighten to specification.